hub setup

A team of Paranormal Investigators based across the UK

Bevel: Hub The hub normally consists of a couple of laptops, displaying the live feed from the cameras and a member of the team taking notes and directing the team to active areas. All the footage is recorded and reviewed post investigation We also use a projector and watch all 4 cameras on the wall.

Bevel: Night Vision Cameras We use 4 night vision cameras for our hub. We tend to favour Sony cameras because of their superior night vision technology. We use actual night vision video cameras instead of the traditional bullet cameras to ensure that the feeds we get are dust free and real.

Bevel: Converter Our camera feeds then head through a converter and then the signal is wirelessly transmitted to the hub (up to 50m)

Bevel: Our hub allows us to record the investigation and over the years we have captured some amazing footage. By using only very short runs of cable, i.e. from the cameras to the modem we reduce the amount of noise normally seen on other systems. The Hub is very time consuming to build and take down and normally an hour is allowed for the setup and positioning of the cameras. We also use locked off motion detection equipment in some rooms with known activity and this has also produced some amazing results.